Gallery™ Plus Beermaster Automated Photometric Analyzer

Save significant time in sample pretreatment and analysis by automating labor-intensive and time-consuming bitterness testing. The Thermo Scientific™ Gallery™ Plus Beermaster is an automated, discrete photometric analyzer dedicated for beer and wort analysis and quality control. Simultaneous automated determination of other analytes from the same sample facilitates beer and wort analysis even further. Increased efficiency in quality control measurements reduce costs and improve productivity in breweries.

  • Unique automated pretreatment and measurement for bitterness. During the automated process, beer bittering substances are extracted in a coated capillary column from interfering compounds present in the sample matrix prior to the photometric analysis at 275nm
  • Various well-known colorimetric tests, like beta-glucan, SO2 and pH, can be run simultaneously
  • Low-volume reaction cuvette uses less reagent and water for lower environmental impact
  • Cost-effective and easy operation improves quality monitoring in the brewing process
  • Capacity: typically 8 bitterness tests/hr, first result in 10 minutes, up to 350 one-reagent colorimetric tests/hr
  • Over 20 system applications for beer and wort analysis
  • Allows set up of user-specific applications
  • Continuous access to samples, reagents and cuvettes without interrupting test processing
  • Reagent disk for 42 reagents
  • Sample disk for 6 racks – 9-pos. sample racks, 60-pos. blocks for automated bitterness sample pretreatment, 6-pos. racks for bitterness reagents

Specifications

Operating Principle

Automated, discrete photometric analyzer capable of random access analysis

Optional units – one system can have only either BCM or ECM unit

BCM: the bitterness unit for automated bitterness measurement, includes extraction column

ECM: the electrochemical unit for pH and conductivity measurement, includes ion selective electrodes

Calibrations

Factor, bias, linear, logit-log, spline, polynomial and point-to-point

Cuvettes

Discrete disposable cuvettes. On board capacity: 360 measurement cells.

Dilutions

Automatic sample pre-dilution. Automatic sample dilution of over-range tests with automatic re-run. Addition of manual pre-dilution value for result calculation.

Quality Control

Real-time QC program with multiple and variable rules. Control frequency user-definable. Out-of-specification control results flagged.

Water Consumption

Deionized water consumption 2.5L/hr. Available on-board.

Power Requirements

100 to 240V ±10%, 50 to 60Hz ±5%, 300w

Dimensions (D x W x H)

27.5 x 37 x 24.4/51.1in. (70 x 94 x 62/130cm with open cover); separate workstation.

Weight

242 lb. (110kg)

צרו קשר

היי! שמחים שהגעתם לאתר שלנו! באתר יש כרגע מאות מוצרים ואנחנו מוסיפים מוצרים כל הזמן. אם לא מצאתם את מה שחיפשתם או שאין לכם כוח לחפש (קורה לכולנו), כתבו לנו כאן מה המוצר שאתם מחפשים ונשלח אליכם הצעת מחיר/נחזור אליכם

    דילוג לתוכן